0086-13780636866 / 0086-17806251160 lisa@qdxgz.cn 0086-13780636866
 |
| Quantity: | |
|---|---|
Prefabricated Steel Structure Workshop Construction Warehouse
Project details of steel structure workshop:
1. Column, Beam: H section steels with anti-rust grey painting
2. Purlin: Galvanization Purlins
3. Secondary Support: Galvanization, e.g. Tie Bracing, Bracing Bars, Angle Steels, all these will improve the stability and durability of the whole structural building.
4. Roof & Wall: Alu-zinc color-coated steel sheet in the thickness of 0.5mm
5. Window: Aluminum-alloy sliding windows
6. Door: Steel Door, Fire-proof Door
Project advantages of steel structure workshop:
1. Efficient construction with controllable costs
The prefabrication rate exceeds 90% : Components are produced in standardized factories with an error of no more than 2mm. On-site bolt splicing or welding is carried out, shortening the construction period by 50% to 70% (for example, the traditional construction of a 1000㎡ residence takes 6 months, while steel structure only takes 2 to 3 months).
Low comprehensive cost: Although the unit price of steel is relatively high, the construction period is short, the labor force is small, and the foundation cost is low (lightweight reduces the cost of foundation treatment). The total life cycle cost is 15%-25% lower than that of concrete.
2. Earthquake-resistant and wind-resistant, safe and durable
Steel has excellent ductility: it can absorb seismic energy and has a seismic resistance rating of 9 degrees (for example, no steel structure school buildings collapsed after the Wenchuan earthquake).
Lightweight structure: Reduces the impact of wind loads and can withstand wind force up to level 12 (applicable in coastal areas).
Anti-corrosion and durability: Hot-dip galvanizing + powder coating, anti-rust life exceeds 50 years (up to 30 years in coastal areas), 100% recyclable.
3. Green and environmentally friendly, in line with sustainable development
Low-carbon throughout the entire life cycle: Carbon emissions during the construction phase are 60%-70% lower than those of concrete, and the steel recycling rate after demolition is 100% (reducing construction waste).
Energy-saving design: The heat transfer coefficient of the enclosure system (such as glass wool insulation layer + double-layer color steel plate) is ≤0.3W/(㎡·K), which is more than 30% more energy-efficient than traditional buildings.
4. Free space and flexible functions
Large-span column-free design: The maximum span can reach over 60 meters (such as in sports venues and exhibition centers), with no columns to block the interior, increasing space utilization by 40%.
Variable floor plan: Supports later renovation (such as lightweight of residential partition walls, and demolition does not require breaking concrete).
Steel structure houses, with efficiency, safety, greenness and intelligence as their core advantages, perfectly conform to the development trend of modern architecture of "industrialization, sustainability and humanization". Whether it is residential, industrial or public buildings, steel structures can provide better solutions. With the promotion of policies and technological progress, its market penetration rate will continue to increase and it will become the mainstream form of future buildings.
FAQ
1. Why choose us?
We are a steel structural building Manufacturer located in Qingdao, China, We have gained a good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business is based on the quality control, price, packing, delivery time etc.
2. Does your company is a factory or trade company?
We are a factory, so you will get the best and competitive price. Our factory covers an area of 150, 000 square meters. If it is available, you might as well visit us.
3. What's the quality assurance you provided and how do you control quality?
Established a procedure to check products at all stages of the manufacturing process - from raw materials, processing, testing or inspection, to finished goods, etc.
4. What's the delivery time?
After we got you deposit, we can deliver goods within 30 days.
5. Can you offer designing service?
Yes, we have more than 100 design engineers. We could design full solution drawings as per your requirements. The software we used here are Auto CAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)V12.0. etc.
6. Do you offer guiding installation on site overseas?
Yes, we can provide the service of installation, supervision and training by extra. We can send our professional technical engineers to supervise installation on site overseas. Besides, we also have our own abroad guiding installation team consisting of more than 30 people.
They have finished many cases successfully in many countries, such as Iraq, Dubai, South Africa, Algeria, Ghana, Gabon, Tajikistan, Burkina Faso, Panama, Australia and so on.
Prefabricated Steel Structure Workshop Construction Warehouse
Project details of steel structure workshop:
1. Column, Beam: H section steels with anti-rust grey painting
2. Purlin: Galvanization Purlins
3. Secondary Support: Galvanization, e.g. Tie Bracing, Bracing Bars, Angle Steels, all these will improve the stability and durability of the whole structural building.
4. Roof & Wall: Alu-zinc color-coated steel sheet in the thickness of 0.5mm
5. Window: Aluminum-alloy sliding windows
6. Door: Steel Door, Fire-proof Door
Project advantages of steel structure workshop:
1. Efficient construction with controllable costs
The prefabrication rate exceeds 90% : Components are produced in standardized factories with an error of no more than 2mm. On-site bolt splicing or welding is carried out, shortening the construction period by 50% to 70% (for example, the traditional construction of a 1000㎡ residence takes 6 months, while steel structure only takes 2 to 3 months).
Low comprehensive cost: Although the unit price of steel is relatively high, the construction period is short, the labor force is small, and the foundation cost is low (lightweight reduces the cost of foundation treatment). The total life cycle cost is 15%-25% lower than that of concrete.
2. Earthquake-resistant and wind-resistant, safe and durable
Steel has excellent ductility: it can absorb seismic energy and has a seismic resistance rating of 9 degrees (for example, no steel structure school buildings collapsed after the Wenchuan earthquake).
Lightweight structure: Reduces the impact of wind loads and can withstand wind force up to level 12 (applicable in coastal areas).
Anti-corrosion and durability: Hot-dip galvanizing + powder coating, anti-rust life exceeds 50 years (up to 30 years in coastal areas), 100% recyclable.
3. Green and environmentally friendly, in line with sustainable development
Low-carbon throughout the entire life cycle: Carbon emissions during the construction phase are 60%-70% lower than those of concrete, and the steel recycling rate after demolition is 100% (reducing construction waste).
Energy-saving design: The heat transfer coefficient of the enclosure system (such as glass wool insulation layer + double-layer color steel plate) is ≤0.3W/(㎡·K), which is more than 30% more energy-efficient than traditional buildings.
4. Free space and flexible functions
Large-span column-free design: The maximum span can reach over 60 meters (such as in sports venues and exhibition centers), with no columns to block the interior, increasing space utilization by 40%.
Variable floor plan: Supports later renovation (such as lightweight of residential partition walls, and demolition does not require breaking concrete).
Steel structure houses, with efficiency, safety, greenness and intelligence as their core advantages, perfectly conform to the development trend of modern architecture of "industrialization, sustainability and humanization". Whether it is residential, industrial or public buildings, steel structures can provide better solutions. With the promotion of policies and technological progress, its market penetration rate will continue to increase and it will become the mainstream form of future buildings.
FAQ
1. Why choose us?
We are a steel structural building Manufacturer located in Qingdao, China, We have gained a good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business is based on the quality control, price, packing, delivery time etc.
2. Does your company is a factory or trade company?
We are a factory, so you will get the best and competitive price. Our factory covers an area of 150, 000 square meters. If it is available, you might as well visit us.
3. What's the quality assurance you provided and how do you control quality?
Established a procedure to check products at all stages of the manufacturing process - from raw materials, processing, testing or inspection, to finished goods, etc.
4. What's the delivery time?
After we got you deposit, we can deliver goods within 30 days.
5. Can you offer designing service?
Yes, we have more than 100 design engineers. We could design full solution drawings as per your requirements. The software we used here are Auto CAD, PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)V12.0. etc.
6. Do you offer guiding installation on site overseas?
Yes, we can provide the service of installation, supervision and training by extra. We can send our professional technical engineers to supervise installation on site overseas. Besides, we also have our own abroad guiding installation team consisting of more than 30 people.
They have finished many cases successfully in many countries, such as Iraq, Dubai, South Africa, Algeria, Ghana, Gabon, Tajikistan, Burkina Faso, Panama, Australia and so on.
